G-10 laminate datasheet
Glass epoxy. Epoxy resin on woven glass, qualified to MIL-I-24768/2.
At a glance
- NEMA grade
- G-10
- Family
- Glass epoxy
- Resin
- Epoxy
- Reinforcement
- Woven glass
- MIL-I-24768
- MIL-I-24768/2
- IPC-4101
- Not applicable
Characteristics. High flexural, impact and bond strength at room temperatures, good electrical properties under dry and humid conditions.
Material page: Glass epoxy.
Standard rod diameters
Sizes other than standard can be furnished on request. Closer tolerances quoted on request.
| Grade | Diameters (inches) | Tolerance | Length | Color | Specifications |
|---|---|---|---|---|---|
| G-10 | 1/16 3/32 1/8 5/32 3/16 7/32 1/4 9/32 5/16 3/8 7/16 1/2 9/16 5/8 3/4 7/8 1″ 1 1/8 1 1/4 1 3/8 1 1/2 1 5/8 1 3/4 2″ 2 1/4 2 1/2 2 3/4 3″ 3 1/4 3 1/2 3 3/4 4″ | 1/16″ to 1 1/4″ diameter inclusive +/- .001. 1 3/8″ diameter and over +/- .003. Closer tolerance quoted on request. | 4 foot nominal. Special lengths quoted on request. | Natural color only. | Grade G-10 glass epoxy rod meets or exceeds all requirements of Military Specification Mil-I-24768, Type GEE. |
Available forms
PDF technical data sheet and SDS
Other grades in this family
Values are NEMA LI 1 minimums and maximums based on 0.500-inch sheet unless stated. They describe the grade, not a lot; certified values ship with the order on request.